Riverbed Interceptor

Interceptor 9200

The Riverbed Interceptor™ is a completely new product and is the ultimate solution for the world's largest enterprise networks. With up to 4 Gbps of optimized WAN traffic supported and up to 1,000,000 simultaneous TCP connections, the Interceptor combined with Steelhead appliances is without doubt the most scalable WDS solution on the market.

Typical Interceptor Deployment

Interceptor is deployed in-path behind a WAN router at the data center from where it distributes TCP connections evenly across a stack of local Steelhead appliances. The Interceptor allows for more flexible and scalable deployment without the need for complex configuration of PBR or WCCP, making the deployment of a Riverbed-based WAN acceleration solution easier, faster and more with more scalability than any other vendor.

Key Features and Benefits

Up to 1,000,000 concurrent connections

The Interceptor allows for a large number of Steelhead appliances to work simultaneously, optimizing up to 1,000,000 connections. The Interceptor is supports in-path configurations over a single interface as large as a 6Gbps ether-channel trunk.

Up to 12 Gigabit Ethernet ports

The Interceptor can be configured with up to 12 Gigabit Ethernet ports to provide optimal scalability on networks with multi-router ingress/egress.

Ether-channel support

The Interceptor offers ether-channel support to increase bandwidth capacity in a variety of combinations to suit any environment. One 6Gbps interface, one 4Gbps and one 2 Gbps interface, or three 2Gbps interfaces are all supported.

TCP connection forwarding

Very large environments with asymmetrically-routed networks can utilise connection forwarding technology across Interceptors to make sure of connection continuity. Connection Forwarding can be enabled on up to 20 Interceptors running in single or failover mode.

Real-time cluster management

The Interceptor allows real-time addition, modification, or removal of Steelhead appliances in a connection distribution group.

Failover support

Interceptor appliances can be configured for failover mode to provide continued operations in the event of a hardware failure.

Link-state propagation

Ensures consistency across networking monitoring systems, an Interceptor will propagate a link state change to an opposing network device. Link state propagation is also supported on serially-clustered Interceptor appliances.

Familiar RiOS user interface

The Interceptor utilizes the same web UI and command line interface as the Steelhead appliance. The same in-path rules system can be utilized on the Interceptor to configure what types of traffic should be optimized by a group of Steelhead appliances.

Variable and Auto Connection Distribution

The Interceptor offers several means of distributing connections between Steelheads in a cluster group, including algorithms for connection allocation based on source IP address, destination IP address, destination port, or the VLAN routing the connection. Without custom rule sets, the Interceptor will dynamically determine the least-loaded Steelhead appliances to which it will direct traffic.

QoS compatible

The Interceptor honors all QoS markings (DSCP and IP Precedence) on traffic it optimizes, ensuring that priority traffic reaches its destination first.

Specifications

Compatibility

• Full feature compatibility with Steelhead appliances running RiOS 3.0 or higher
• Limited support for Steelhead appliances running earlier releases of RiOS

Platform

• 3U Rack Mount Chassis
• Triple redundant power supplies

Web Browser Support

• Most major browsers running current versions
• Tested with Mozilla and Internet Explorer

Datasheets:

• Interceptor

For a technical consultant to call you click here and they will do so at the time you specify. If you are looking for a quotation or need help designing your solution then click here. If you require access to our SECURE online catalogue then click here.